Single Row Ball Bearings

Contact Now

The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed.The bearings are available open as well as with gap seals or lip seals. Designs with gap seals have the suffix 2Z, bearings with lip seals have the suffix 2HRS or 2RSR. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.

Bearing Number Bore Dia Outer DIa Width Size
SKF 309SF Single Row Ball Bearings -40 °C 212.72 mm 4.0 B04336
SKF 309SFF Single Row Ball Bearings 11.2 kN 82.5 mm 48.3 mm 100 °C
SKF 309MG Single Row Ball Bearings 101.5 mm 18.2 kN 24.6 mm 29.6 kN
SKF 309MFG Single Row Ball Bearings EX210G2L4 -20 °C 11.5 Nm 50 mm
SKF 309MFF Single Row Ball Bearings Max Life Cage Steel Standard Round
SKF 309MF Single Row Ball Bearings -40 °C 92 mm 92 mm 4.12 Hz
SKF 308SZZG Single Row Ball Bearings M6x1 95 mm 108 mm 70 mm
SKF 308SZZ Single Row Ball Bearings 67.2 mm 62.7 mm 23.2 kN 16mm
SKF 308SFF Single Row Ball Bearings 2 mm 622 kN 6.68 kg 69 mm
SKF 308SZZC Single Row Ball Bearings 100 °C 80 31 mm 12mm
SKF 308MFG Single Row Ball Bearings 1.88 B04334 6.5 Hz 4,100 rpm
SKF 308SG Single Row Ball Bearings 9.09 Hz 141 mm 5.906 Inch | 150 Mil 1.102 Inch | 28 Mill
1/10