Single Row Ball Bearings

Contact Now

The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed.The bearings are available open as well as with gap seals or lip seals. Designs with gap seals have the suffix 2Z, bearings with lip seals have the suffix 2HRS or 2RSR. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.

Bearing Number Bore Dia Outer DIa Width Size
SKF 219SF Single Row Ball Bearings 96 mm 139 mm 4,100 rpm 136.5 mm
SKF 220S Single Row Ball Bearings -20 °C 19 mm 7.8 kN 25 mm
SKF 221MF Single Row Ball Bearings 36.95 mm 48.4 mm 43.55 kN 32.5 mm
SKF 220MFF Single Row Ball Bearings 6.86 Hz 120 °C 4547359482041 56 kN
SKF 220MF Single Row Ball Bearings 69.9 mm 4.13 kg -20 °C R1/8"
SKF 220M Single Row Ball Bearings 782475249664 Single Lip 208 Series None
SKF 219SZZ Single Row Ball Bearings M6x1 45 mm 13 mm 148 mm
SKF 219S Single Row Ball Bearings -20 °C 20 mm 33.3 mm 41.3 mm
SKF 219SFF Single Row Ball Bearings 34.8 mm 60 mm SCOU203-11 -20 °C
SKF 219MF Single Row Ball Bearings 4 Bolt Pillow Block SPECIAL DUTY Expansion 285 LB
SKF 219M Single Row Ball Bearings F308- 57.1 mm 60.3 mm 41.25 mm
SKF 219MG Single Row Ball Bearings 3.7 Nm 42 mm 54 mm 12.7 mm
6/10