Single Row Ball Bearings

Contact Now

The different rolling bearing types have specific characteristics due to their design. Depending on the type, they are suitable for widely differing applications. Ball roller bearings are designed such that they fulfil a range of technical and economic requirements to an excellent degree. This new type can be used to achieve optimum designs for new bearing arrangements and to replace existing bearing arrangements. The following overview shows comparable rolling bearing types and describes their suitability for the requirements placed on a bearing. In the application, the information in this TPI as well as in Catalogue HR 1, Rolling Bearings, must be observed.The bearings are available open as well as with gap seals or lip seals. Designs with gap seals have the suffix 2Z, bearings with lip seals have the suffix 2HRS or 2RSR. Other seal designs are available by agreement. Lubrication Open bearings can be lubricated with grease or oil. Bearings sealed on both sides are greased for life using a lithium soap grease with a mineral oil base.

Bearing Number Bore Dia Outer DIa Width Size
SKF 308S Single Row Ball Bearings Unirex N2 No 45.0000 mm Cast Iron
SKF 308SFG Single Row Ball Bearings 14mm 29.6 kN 32 mm 1.93 kg
SKF 308SFFC Single Row Ball Bearings 16 mm 202 mm 16.8 Nm 238 mm
SKF 308SFFCG Single Row Ball Bearings CN 2 mm 120 °C 131 mm
SKF 308SZ Single Row Ball Bearings 137 mm 16mm 2.3 kg 31.85 kN
SKF 308MFFG Single Row Ball Bearings 1.5 mm 6.86 Hz NTN 120 °C
SKF 308MF Single Row Ball Bearings 15.2 kN 37.6 mm 51.1 mm 18.8 mm
SKF 308MFF Single Row Ball Bearings 1.2 kg 53 mm 1.5 mm 1.5
SKF 307SZZG Single Row Ball Bearings 2.1 mm -40 °C 156 mm 215 mm
SKF 307SZZC Single Row Ball Bearings 125 mm 8.1 Hz 31 mm 1.5 mm
SKF 307SZZ10 Single Row Ball Bearings 11.3 mm 51.8 kN 71 mm 2
SKF 307SZZ Single Row Ball Bearings PAE205N- 21 mm R1/8" 70 mm
2/10